JFM - Making Tracks LITE, 2-Ply Sport Weight, 100% US Wool

Junction Fiber Mill's Making Tracks yarn is a hand-dyed variegated blend of fine Merino, Targhee, and Corriedale wool from flocks in Idaho to western South Dakota. Scoured and combed at Chargeurs, it is hand-dyed, pin-drafted, spun, and finished in small batches at Junction Fiber Mill in White River Junction, Vermont. Proudly, this yarn is 100% American-grown and produced, non-superwashed, and non-mulesed.  And these fluorescent colors just make us smile!

100% US Wool Blend of Fine Merino, Targhee & Corriedale. Finished at Junction Fiber Mill in White River Junction, Vermont.

~50g (~1.8oz) skein - 210yd (192m), 2-Ply Sport Weight.

Gauge & Needles: 5.75-6.5 sts per inch (2.5cm) on US3 (3.25mm) - US5 (3.75mm) needles (based on CYC Standards for Fine). 

Care:  Wet-Blocking & Wash Instructions - Fill a sink or basin with cold water and add a small amount of no-rinse wool wash.  Submerge your knitted item, gently squeezing out any air bubbles to ensure it stays fully underwater and soak for up to 10 minutes. While our dyes are tested for colorfastness, some dyes are notoriously difficult to set and may release a small amount of excess color. Using cold water, gentle wool wash, and a short soak will help prevent color redeposit on light-colored fibers.  Drain the water and gently lift your knitted item from the water and remove excess moisture by rolling it between clean, dry towels with light pressure.  Lay flat and shape to air dry.  For projects with contrasting colors, we recommend steam blocking to avoid any color transfer.